Allergy filter Sarne Pro 0,5x1,2m
In stock 34 pcs
Efficient Sarne Pro filter fabric blocks pollen, mold spores, and urban dust
Sarne Pro is an excellent allergy filter, effectively capturing pollen, mold spores, and dirty street dust. It also efficiently blocks fine particles from traffic and wood burning – the ones considered most harmful to health.
The Pro fabric is easy to attach to a ventilation hatch using double-sided tape. If the outer grille is made of metal (not aluminum), magnets can also be used.
Sarne Pro is water-repellent and does not serve as a growth medium for bacteria, but prolonged exposure to weather conditions can shorten its service life.
Thanks to its high efficiency and low air resistance, Sarne Pro can also be used as an additional filter in fully mechanical ventilation systems, helping to prevent dust and microbes accumulating in ducts, as well as particles released from sound insulation materials, from entering indoor spaces.
NEW! The highly efficient Sarne Pro filter fabric blocks pollen, mold spores, and urban dust
Filtering incoming air is the most effective way to prevent airborne allergens and pollution particles from entering indoor spaces. Even the smallest particles are captured by the filter fabric thanks to its electrostatic charge, which means the material does not need to be dense to be highly effective. As a result, it allows fresh air to flow through easily.
Sarne Pro is more than just a pollen filter – it also efficiently blocks much smaller and more harmful fine particles caused by traffic, wood burning, forest fires, and long-range pollution transport.
The filter can be attached to a window with double-sided tape. For wooden windows, we recommend securing it further with tacks or a stapler. For aluminum windows, foam or other flexible material can be wedged between the window trim and frame. Especially in large windows or windy locations, securing the filter well is important.
When installed in a ventilation hatch with a metal (non-aluminum) outer grille, the filter is most conveniently attached using magnets.
The fabric is easy to cut with scissors.
Available pre-cut sizes:
-
0.8 m × 1.2 m
-
1.35 m × 1.2 m
-
1.60 m × 1.2 m
| PRODUCT | AIR PERMEABILITY | FILTRATION EFFICIENCY | PRESSURE DROP |
| l/m²s | % | Pa | |
| Sarne Flow | 4060 | 63.65 % | 9.6 |
| Sarne Pro | 2885 | 80.05 % | 11.6 |
Test methods:
Air permeability: EN/ISO 9237 A = 20 cm², 2 mbar
Filtration & pressure drop: TSI 8130A, EN13274-7, 0.6 µm NaCl, 95 l/min
This product has not yet been reviewed.
